Skill Development



Skill Development

INDUSTRY INSTITUTE PARTNERSHIP: Centre of Excellence

  • PMKVY:
    GCOERC is successfully conducting training courses under the scheme of Pradhna Mantri Kaushal Vikas Yajan (PMKVY) for technical Institute for Lathe, Welding, Survey, Draftman etc.
  • Mechatronics Lab:
    Guru Gobind Singh Foundation developed the centre of excellence under Industry Institute Partnership in association with SIMENS Ltd. and BOSCH.
    The objective of COE is to bridge the gap between Industry and Academic with advanced training module for students.
  • Atal Tinkering Laboratory:
    ATAL Tinkering Laboratory is established under the government ATAL Innovation Mission (AIM) the Government of the India has set up the ATAL Innovation machine (AIME) at NITI Aayog . Tinkering Lab consists of 80 + tools like DIY kits ,3D printer, Robotics, and various scientific mechanical ,electrical equipments.
  • CNC Lab :
    Well-equipped CNC Machine Shop to make the students industry ready by all means. all machines available are as per industry slandered.
  • SAT-COM Laboratory:
    SAT-COM Laboratory –Satellite communication utilization has become wide spread toady. Most of us are in touch by satellite communication in more ways than we realize. SAT-COM is establish to enable students to enhance their knowledge ,understanding and practical experience in those aspects of satellite communication.
  • BOSCH and Siemen’s Labs:
    Guru Gobind Singh Foundation has taken an initiative in the direction of development, to enhance the skill of students as a part of “Institute Industry Partnership Excellence Centre” presented by SIEMENS Ltd. and BOSCH. The motto behind this Skill Development centre is to bridge the gap between industry and academic sector with advanced training module for students in SIEMENS Ltd. and BOSCH Training Centre.
With this initiative GGSF made the MOU with BOSCH & SIEMENS respectively to fulfil the following objectives:
  1. Prepare students for industry oriented learning through tailor made training programs.
  2. Knowledge sharing on Bosch and Siemens advanced automotive systems.
  3. Advanced training modules for students in Bosch and Siemens Training Centres.

Courses offered by “ Institute Industry Partnership Excellence Centre” :-

Sr.No

Bosch Modules

Siemens Modules

1

Auto Electrical Systems (Starter, Alternator and Batteries)

Training  Program  on Low Voltage Switchgear

2

Vehicle Diagnostics Basics and System Diagnostics.

Training Programme on Basic SCADA

3

Basic Course on Diesel Fuel Injection System

Training Programme on Basics of AC/DC Drives

4

Vehicle Air-Conditioning Systems and Functions.

Training Programme on Basic Automation

5

 

 Training on Mechatronics kit

Glimpses of Hands on Training

Skill Development

Under the “Pradhan Mantra Kaushal Vikas Yojana Skill Development” we have establish excellent facility and developing skills of our students as well as contributing towards society.

Training Partner:
Spectrum Academy
Address :     2nd Floor, Vadnagare Bhavan, Opposite Circle Cinema, Near Ashok Stambh, Nashik.
Mobile No:   9225129680/1

Civil Engineering Skill Development

Glimpses of Events

Module topic Surveying
Topic Introduction to Surveying
Date and Day of an  lecture 21/08/2020 Friday
Time of the lecture 10-11.00 AM 
Total student strength  45 Students
Year and Branch SY-Civil

Module topic Surveying


Topi-Micro Optic Theodolite

A Theodolite works by combining optical plummets (or plumb bobs), a spirit (bubble level), and graduated circles to find vertical and horizontal angles in surveying. An optical plummet ensures the theodolite is placed as close to exactly vertical above the survey point. The internal spirit level makes sure the device is level to to the horizon. The graduated circles, one vertical and one horizontal, allow the user to actually survey for angles.

Date and Day of an  lecture 27/10/2020 Tuesday
Time of the lecture 12:00-1:00 PM 
Total student strength  37 Students
Year and Branch SY-Civil

Electrical Engineering Development

Details of Modules handled by Skill Development center

 Sr.No. Name of module  Name of Branch  Date No. of Students Present Name of Co-coordinator
1 Auto AC ACS-651 SYEE 44114 56 Prof.Kunal Borse
2 MECHATRONICS SKILL DEVELOPMENT TRAINING SYEE 44086 30 Prof.Y.V.Chandratre
3 Siemens AC-DC Drives Skill
development Training
TYEE 44086 35 Mrs.V.V.Palve
4 Siemens LV Switchgear Skill
development Training
SYEE 30/01/2020 and 25/07/2020 to 26/09/2020 55 Ms. P.K.Chowdhary
5 CNC MACHINE SKILL DEVELOPMENT TRAINING TYEE 21/09/2019 and 28/09/2019 46 Prof.V.K.Dhagate
6 DATA ENTRY OPERATOR SKILL DEVELOPMENT
TRAINING
FYEE 43733 63 Ms. Monica Sindhikar
7 Siemens LV Switchgear Skill development Training TYEE 43739 46 Ms. P.K.Chowdhary

Glimpses of Events

Sr. No Objective of Training
1

To introduce students with knowledge on Air Conditioning Basics, Fundamentals of Automotive Air Conditioning Maintenance and Air Conditioning Split Systems. The course explains how theory is applied within the industry, gives complementary preparation to practical training, and offers an insight into the industry's best practice. 

2

To introduce students with Mechatronics, which is also called mechatronics engineering, a multidisciplinary branch of engineering that focuses on the engineering of both electrical and mechanical systems, and also includes a combination of robotics, electronics, computer, telecommunications, systems, control, and product engineering.

3

To introduce students with a basic understanding of AC and DC motor and drive concepts and terminology. At the completion of this course, students gained the necessary fundamental knowledge and skills required to attend other Rockwell Automation AC and DC drives courses. 

4

To introduce students with various Low Voltage Switchgear devices manufactured by the esteemed automation industry, Siemens. The students were trained about the technologies, techniques and industrial methods of electrical engineering field currently being used in Electric power system protection.

5

To introduce students with the concept of computer numeric controlled Machine. The students were trained
about the technologies, techniques and programming methods of mechanical engineering field currently being used in manufacturing processes.

6

To enable students to use computers for internet services, electronic documentation, data analysis and slide presentation. In simple terms, data entry deals with entering or updating data into a computer system. Data is usually entered using a keyboard, optical scanner or data recorder. Since most Offices use computer systems these
days, data entry has become an integral part of day-to-day office tasks. A data entry course trains students in the following aspects: Computer Operation, Software and Hardware, Typing and Internet Technology.

7

To introduce students with various Low Voltage Switchgear devices manufactured by the esteemed automation industry, Siemens. The students were trained about the technologies, techniques and industrial methods of electrical engineering field currently being used in Electric power system protection.

8

To introduce students with various Low Voltage Switchgear devices manufactured by the esteemed automation industry, Siemens. The students were trained about the technologies, techniques and industrial methods of electrical engineering field currently being used in Electric power system protection.






Mechanical Engineering Development

Details of Modules handled by Skill Development center

 Sr.No. Name of module  Name of Branch  Name of Co-coordinator
1 Basic Diesel EPS-100 Mechanical Prof. S.V.Kasar
2 Auto Electrical Test bench  Mechanical Prof.Ganesh D.Wagh/Prof. Bhushan A Burkule
3 Auto Air conditioning ACS-651 Mechanical Prof.Naresh A.Jadhav/Prof.Kunal H.Borase
4 Automation (PLC) Mechanical Prof. Yogesh V. Chandratre
5 AC/DC Drive Mechanical Prof.Vidya Palve
6 CNC Machine Mechanical Prof. K.P.Suryawanshi/ Prof.M.S.Pimple
7 L.V. Switch Gear Mechanical Prof . Parneet Choudhari
8 OBD II Mechanical Prof. K.P.Suryawanshi/ Prof.S.A.Patil
9 Data Entry Mechanical Prof.Deepika Thakare
10 Mecatronics Mechanical Prof. Mukund K. Holkar/ Prof. Yogesh V. Chandratre

Glimpses of Events

Name of Module  Details no of students Date Of Conduction
Basic Diesel EPS-100

 It Is Important for diploma engineerTo Interpret the required automotive component based on analysis of automobile specifications. By this module Students will able to perform testing of fuel injector on EPS 100

157 20/10/2020 , 26/09/2020, 10/10/2020
Auto Electrical Test bench 

 It Is Important for diploma engineerTo Interpret the required automotive component based on analysis of automobile specifications. By this module Students will able to Identify the Fault in Starter,Alternator, Battery (12V & 24V)

77 8/8/2020, 22/08/2020, 12/09/2020
Auto Air conditioning ACS-651

 It Is Important for diploma engineerTo Interpret the required automotive component based on analysis of automobile specifications. By this module Students will able to Diagnose Car Air conditioning sysytem

148 25/07/2020, 8/8/2020, 22/08/2020
Automation (PLC)

 It Is Important for diploma engineer to understnd fundamentals of mechatronics system which enables him to work as technician to adopt an interdiciplinary approch of engineering while working on shop floor.By this module Students will able to Diagnose Car Air conditioning sysytem

  Planned in EVEN sem
AC/DC Drive

 It Is Important for diploma engineer to understnd fundamentals of AC/DC Drive system which enables him to work as technician to adopt an interdiciplinary approch of engineering while working on shop floor.By this module Students will able to Diagnose AC DC drive

  Planned in EVEN sem
CNC Machine

 It Is Important for diploma engineer to maintain functioning of advanced manufacturing processes and equipment like CNC machinbe.By this module Students will able to operate CNC Machine

190 25/07/2020, 8/8/2020, 22/08/2020
L.V. Switch Gear

 It Is Important for diploma engineer to understnd fundamentals of L.V.Switc gear system which enables him to work as technician to adopt an interdiciplinary approch of engineering while working on shop floor.By this module Students will able to Diagnose Switch gear

162 26/09/2020, 10/10/2020, 24/10/2020
OBD II

 It Is Important for diploma engineerTo Interpret the required automotive component based on analysis of automobile specifications.By this module Students will able to Diagnose Switch gear.Students will able to  use KTS 500 for vehical Dignosis.

  Planned in EVEN sem
Data Entry

The Rational of this course is to development the basic competency in students for using office automation tools to accomplish the job.Students will able to use MS Office

  Planned in EVEN sem
Mecatronics

 It Is Important for diploma engineer to understnd fundamentals of mechatronics system which enables him to work as technician to adopt an interdiciplinary approch of engineering while working on shop floor.By this module Students will able to Understand working and construction of 5 station automated work station.

160 Planned in EVEN sem